Nesting

I decided to take the plunge and purchase some Nest thermostats when I read some of the early press about them. You couldn't actually buy one at the time, all you could do was put your name on a list to get them first when they became available. I did so and then waited.

My motivation was pretty simple: I wanted something that was easy to program and internet accessible. In fact, the joy of a "self learning" system wasn't one of my primary motivating factors. The interface for the Nest looked good and my understanding was that it should fulfill my other wants - so I went ahead despite the reasonably high $250/unit starter cost. If I really could schedule easily, I could easily save the purchase price in a couple of years. Despite the fact that we had two programmable units in the house, I found their interfaces to pretty much be impenetrable and, for the most part left them unprogrammed.

On February 14, I got a message saying that I could order my Nest. But, "Click below to order, but please note that you can only order once using this personal reservation page." So I decided to take the plunge and ordered two - one for the upstairs systems and one for the downstairs. They shipped within two days and were here quickly - it was just a matter of me finding a few hours to install them and configure.

The installation was not difficult and the materials provided were well thought out. They even include a screw driver with interchangeable heads to allow you to easily unscrew pretty much anything that you'd encounter. There were also nice little (blue) stickers that you could use to label each of the wires positions before undoing anything; this should ensure that you don't mess anything up.

Despite all of the good documentation, there was a cryptic note about not having to jumper the Rc and the Rh (both red) lines together. It wasn't clear if I needed to attach one of them or both, if they were separate wires. I eventually concluded that there is only one red control line coming from the furnace and just connected it to the easiest place on the nest panel.

One of the more painful parts of installing the Nest is finding a part of our wall that wasn't chewed up with past thermostat installations. It would appear that they have been replaced multiple times. Strategically choosing a good position took the most amount of time in both cases (and even worse when I had to pull off the Nest upstairs after the first time due to one of the wires not being connected well).

Here are all of the install pictures:


So downstairs, I was starting with a pretty old Honeywell control unit - this was the starting point for the downstairs thermostat - not sure of the vintage


The old on the floor - with the new


Wires all labeled


Connected to the Nest mounting panel - conveniently with a built-in level


Mounted!


Mounted - upstairs!

After all of the wires were connected, you simply pop the eyeball (in Christa's words) on. It will want to connect to your wireless network, so the first step is to put in your password. After that, it updates to the most recent software level (the one downstairs did this several times before it was done - the one upstairs, just once). After that you can begin the setup; the first step is to show you which wires it thinks are connected. It does this in an incredible simple visual way, making sure that there is no question about whether its done right.


The rest of the setup to do on the machine is a breeze. The fun part comes when you sign up for a nest.com account. When you do, it recognizes the thermostat on your local network and you are good to go. From there, I took two different approaches. For the upstairs thermostat, I decided to set a schedule and for the downstairs I let the system learn our behavior to set the temperature.

The web interface for scheduling is pretty good, though not great. It does include copy and paste functionality. I don't know if its just an early quirk, but I lost the schedule the first time I put it together. The upstairs Nest had lost its connection to our wi-fi network, so that could have been a contributing factor. The primary iPhone application doesn't do much more than allow you to adjust the temperature, but that is exactly why I bought it.


What Its Missing:

• My chief complaint so far is that Nest doesn't share any data with me. I should be able to access a log of all of the events of the thermostat (turn on, turn off, all of the relevant parameters at that point in time, such as why it was turning off or on).
• The units are designed to learn about your behavior to help you save energy. But when that happens, it doesn't tell you anything about what its learned or what you have saved.
• My wife doesn't like the aesthetic. It looks like an ugly eyeball in her opinion.